Chinese (Simplified)EnglishFinnishHindi

Metal Slitting Machine


Metal Slitting Machine

Our Metal Slitting Machines are extensively used for slitting band steel/steel coil, carbon steel strip, copper strip, and all the other kinds of metal materials. The company is a distinguished Manufacturer, Supplier and Exporter of Metal Slitting Machines from China. Rigorous quality-tests ensure that only defect-free Machines reach the buyers. We are capable of delivering bulk orders of the Slitting Machines within the allocated time.

 

Structure :

  • Cart for uncoiler

  • Single side/ double side uncoiler (support arm stand for single side uncoiler)

  • Leveling/ leveling + shearing stand

  • Loop bridge

  • Side guide stand

  • Single slitting knife/ double slitting knife stand

  • Loop bridge and scrap winder

  • Tension pad stand

  • Recoiler

  • Coil cart for recoiler

  • Electric control system

 

Features :

  • By means of Programmable Logic Controller (PLC), system performance is based upon the characteristics of various metal sheets, and switch high / low speed operating mode automatically , so as to achieve improved efficiency and reduced maintenance dramatically.

  • For lower malfunctioning, the material uncoiler uses an expand / shrink hydraulic cylinder that is mounted on an integrated steel frame.

  • The material uncoiler is equipped with a high efficiency disc type brake, its tension is adjusted by the air - pressure loop.

  • Under this circumstance, the time for tension adjustment is reduce, also, the forced monetary braking is occurred thus free from loosen of coil.

  • The pre - loader is equipped with DC Various - Speed motor drive, so that a synchronized speed cooperate to the production line could be governed.

  • Slitting knives are mounted on integrated frame with a separated 1 transmission, that means enhanced rigidity structure of Machine, lower vibration amplitude of knives, and excellent yields could be produced.

  • The datum plane and accuracy of sitting Knives'axes are all to be fabricated within 0.006mm in tolerance, so that makes higher duration of slitting knives and much excellent , accury of outputs of the slitting line.

  • For securing the stability of slitting line during operation, the tension controlled roll - up device with slip differential structure is designed for the waster.

  • The tension pad uses high elastics and resistive carpet as surface materials, so keep the outputs of the Line smoother. In addition, it also equipped a pressure-balance device to keep an even-pressure over the both side of materials that toched with the tightener.

  • The recoiler is equipped with an improved / high rigid holder, that causes reduce of lead time . An hydrolic pressure adjustable back - pressure device is equipped on the separator mechanism , so that a constant hold - pressure could be reached for recoil.

  • Self - tension design enable to retain a better tightness during recoil.


Additional Information

Min. Order Quantity 1 Set(s)
Port Any port,Guangdong
Payment Terms L/C, T/T, Western Union


Specifications

Model BG500

BG650

BG750

BG850

BG11000

BG1350

Strip width(mm)

460

620

720

820

950

1300

Material thickness(mm)

0.1-2.0

0.1-2.0

0.1-2.0

0.1-2.0

0.2-2.5

0.2-2.5

Slit strands

10-20

10-20

10-20

10-20

10-20

10-20

Total power(kw)

33 33 33

37

37-45

37-45

Slitting speed (m/min)

0-100

0-100

0-100

0-100

0-70

0-70

Coil Weight (ton)

5 5 5

6

8.5

10

Size(L*W*H)(m)

15*4*2.5

16*4*2.5

18*4*2.5

18*4*2.5

22*6*2.5

22*6*2.5

 


Slitting Machine CAD Stereograms

Slitting Machine CAD Stereograms